Pressure Seal Parallel Disc Gate Valves

 

Dimensions & Weights



ASME Class 600

Pressure Seal Gate Valves - Dimensions
  • Fig. No. 55506-7-WE* Flex Wedge, Butt Weld Ends
  • Fig. No. 55506-7 Flex Wedge, Flanged Raised Face
  • Fig. No. 55506-7-RJ Flex Wedge, Flanged, Ring Joint
  • Fig. No. 55406-7-WE* Parallel Seat Disc, Butt Weld Ends
  • Fig. No. 55406-7 Parallel Seat Disc, Flanged, Raised Face
  • Fig. No. 55406-7-RJ Parallel Seat Disc, Flanged, Ring Joint
Dim Description VALVE SIZES (inches)
2 2.5 3 4 6 8 10 12 18 20 24
A End-to-End Weld Ends in. 8.50** 8.50 10.00 12.00 18.00 23.00 28.00 32.00 43.00 47 55.00
mm 216 216 254 305 458 585 712 813 1092 1194 1397
A1 Face-to-Face Flanged Ends in. N/A N/A 14.00 17.00 22.00 26.00 31.00 33.00 43.00 47 55.00
mm N/A N/A 356 432 559 661 788 839 1092 1194 1397
A2 Face-to-Face RTJ in. N/A N/A 14.13 17.13 22.13 26.13 31.13 33.13 43.13 47.13 55.38
mm N/A N/A 359 436 563 664 791 842 1096 1197 1407
K Center-to-Top Open in. 18.06 18.06 18.69 22.81 32.69 38.00 45.56 51.19 76.00 80.00 94.00
mm 459 459 475 579 830 965 1157 1300 1930 2032 2388
M Handwheel Dia. in. 14 14 14 14 14 18 24 24 24 24 24
mm 356 356 356 356 356 457 610 610 610 610 610
* Weight Weld Ends lbs. 78 78 80 123 312 588 995 1462 4000 5200 8300
kg 36 36 37 56 141 267 451 663 1814 2359 3765
  Weight Flanged Ends lbs. 125 125 131 213 511 903 1495 2157 4750 5900 9570
kg 57 57 59 96 232 410 678 978 2155 2676 4340

NOTE:

  1. Valves are supplied with a handwheel actuator on all sizes.


VENTURI GATE VALVES


Fig. No. 55506-7-WE* Butt Weld Ends

Dim Description VALVE SIZES (inches)
8x6x8 10x8x10 12x10x12 14x12x14 20x18x20 24x20x24 26x24x26
A End-to-End in. 18 23 28 32 43.00 47 55.00
mm 458 585 712 813 1092 1194 1397
K Center-to-Top Open in. 32.69 38.00 45.56 51.19 76.00 80.00 94.00
mm 831 966 1158 1301 1930 2032 2388
M Handwheel Dia. in. 14 18 24 24 24 24 24
mm 356 457 610 610 610 610 610
** Weight lbs. 359 682 1124 1550 4200 6100 8700
kg 163 309 510 703 1905 2767 3946

NOTES:

  1. Valves are supplied with a handwheel actuator on all sizes.

General Notes:

  1. Dimensions, weights, and other engineering data are subject to change or modification. This data is not to be used for construction unless confirmed by CNI.
  2. All pressure seal gate valves are available with a solid wedge. Specify figure number 55006.
  3. Meets design requirements of ASME Section III, B16.34, B16.5, B16.25 and B16.10

* Specify pipe schedule.
** Mfg std end-to-end dimensions.



ASME Class 900

Pressure Seal Gate Valves - Dimensions
  • Fig. No. 55509-7-WE* Flex Wedge, Butt Weld Ends
  • Fig. No. 55509-7 Flex Wedge, Flanged Raised Face
  • Fig. No. 55509-7-RJ Flex Wedge, Flanged, Ring Joint
  • Fig. No. 55409-7-WE* Parallel Seat Disc, Butt Weld Ends
  • Fig. No. 55409-7 Parallel Seat Disc, Flanged, Raised Face
  • Fig. No. 55409-7-RJ Parallel Seat Disc, Flanged, Ring Joint
Dim Description VALVE SIZES (inches)
2 2.5 3 4 6 8 10 12 14 16 18 20 24
A End-to-End Weld Ends in. 8.5 10 12 14 20 26 31 36 39 43 48 52 61
mm 216 254 305 356 508 660 787 914 991 1092 1219 1321 1549
A1 Face-to-Face Flanged Ends in. N/A N/A 15 18 24 29 33 38 40.5 44.5 48 52 61
mm N/A N/A 381 457 609 736 838 965 1028 1130 1219 1320 1549
A2 Face-to-Face RTJ in. N/A N/A 15.13 18.13 24.13 29.13 33.13 38.13 40.88 44.88 48.5 52.5 61.75
mm N/A N/A 384 460 612 740 841 968 1039 1140 1231 1333 1568
K Center-to-Top Open in. 17.25 17.25 19.06 22.44 32.25 37.31 45.13 51.06 59.00 69.00 75.00 81.00 91.00
mm 438 438 485 570 820 948 1147 1297 1499 1758 1911 2044 2311
M Handwheel Dia. in. 14 14 14 14 18 24 28 34 34 30 30 30 20
mm 356 356 356 356 457 609 711 863 863 762 762 762 508
** Weight Weld Ends lbs 63 84 84 129 328 619 1048 1539 2177 3066 4600 5369 8603
kg 29 38 38 59 148 279 472 693 987 1390 2086 2435 3902
** Weight Flanged Ends lbs N/A N/A 137 224 537 930 1559 2250 3180 4300 6400 7500 12600
kg N/A N/A 62 101 243 421 707 1020 1442 1950 2903 3402 5715

NOTE:

  1. Valves are supplied with a handwheel actuator through 14". Bevel gear supplied on 16"-24".


VENTURI GATE VALVES


Fig. No. 55509-7-WE* Butt Weld Ends

Dim Description VALVE SIZES (inches)
8x6x8 10x8x10 12x10x12 14x12x14 16x14x16 18x16x18 20x18x20 22x20x22 26x24x26
A End-to-End in. 20 26 31 36 39 43 48 52 61
mm 508 660 787 914 991 1092 1219 1321 1549
K Center-to-Top Open in. 32.25 37.31 45.13 51.06 59 69 75 81 91
mm 820 948 1147 1297 1499 1651 1778 2044 2311
M Handwheel Dia. in. 18 24 28 34 34 30 30 30 20
mm 457 609 71 863 863 762 762 762 508
** Weight lbs 340 642 1083 1586 2238 3140 4700 5500 8750
kg 153 289 488 714 1008 1413 2115 2475 3969

NOTES:

  1. Valves are supplied with a handwheel actuator through 16" x 14" x 16". Bevel gear supplied on 18" x 16" x 18" and larger.

General Notes:

  1. Dimensions, weights, and other engineering data are subject to change or modification. This data is not to be used for construction unless confirmed by CNI.
  2. All pressure seal gate valves are available with a solid wedge. Specify figure number 55009.
  3. Meets design requirements of ASME Section III, B16.34, B16.5, B16.25 and B16.10

* Specify pipe schedule.
**Weight includes standard bevel gear where applicable (see note 1 above).



ASME Class 1500

Pressure Seal Gate Valves - Dimensions

  • Fig. No. 55515-7-WE* Flex Wedge, Butt Weld Ends
  • Fig. No. 55515-7 Flex Wedge, Flanged Raised Face
  • Fig. No. 55515-7-RJ Flex Wedge, Flanged, Ring Joint
  • Fig. No. 55415-7-WE* Parallel Seat Disc, Butt Weld Ends
  • Fig. No. 55415-7 Parallel Seat Disc, Flanged, Raised Face
  • Fig. No. 55415-7-RJ Parallel Seat Disc, Flanged, Ring Joint
Dim Description VALVE SIZES (inches)
2 2.5 3 4 6 8 10 12 14 16 18 20 24
A End-to-End Weld Ends in. 8.5 10 12 16 22 28 34 39 42 47 53 58 60
mm 216 254 305 406 559 711 864 991 1067 1194 1346 1473 1943
A1 Face-to-Face Flanged Ends in. 16.5** 16.5 18.5 21.5 27.75 32.75 39 44.5 49.5 54.5 60.5 65.5 76.5
mm 419 419 470 546 705 831 990 1130 1257 1384 1536 1663 1943
A2 Face-to-Face RTJ in. 16.63** 16.63 18.63 21.63 28 33.13 39.38 45.13 50.25 55.38 61.38 66.38 77.63
mm 422 422 473 549 711 841 1000 1146 1276 1406 1559 1685 1972
K Center-to-Top Open in. 17.25 17.25 21.00 24.75 33.00 36.75 44.50 50.63 67 74 77 90 98
mm 438 438 533 629 837 933 1130 1286 1695 1880 1962 2286 2489
M Handwheel Dia. in. 14 14 14 14 24 24 24 24 30 30 30 30 30
mm 356 356 356 356 610 610 610 610 762 762 762 762 762
*** Weight Weld Ends lbs 84 110 110 200 524 905 1880 2536 3226 4211 5453 6322 9450
kg 38 50 50 90 236 408 846 1142 1463 1909 2473 2867 4286
*** Weight Flanged Ends lbs 137 181 181 322 751 1330 2242 3610 4954 6516 8520 10157 14175
kg 62 82 82 145 338 599 1009 1625 2246 2955 3863 4606 6430

NOTE:

  1. Valves are supplied with a handwheel actuator through 12". Bevel gear supplied on 14"-24".


VENTURI GATE VALVES


Fig. No. 55515-7-WE* Butt Weld Ends

Dim Description VALVE SIZES (inches)
8x6x8 10x8x10 12x10x12 14x12x14 16x14x16 18x16x18 20x18x20 22x20x22
A End-to-End in. 22 28 34 39 42 47 53 58
mm 559 711 864 991 1067 1194 1346 1473
K Center-to-Top Open in. 33 36.75 44.50 50.63 67 74 77 90
mm 837 933 1130 1286 1689 1880 1962 2286
M Handwheel Dia. in. 24 34 34 34 30 20 20 20
mm 609 863 863 863 762 508 508 508
*** Weight lbs 545 938 1943 2615 3316 4316 5573 6500
kg 246 423 875 1177 1493 1943 2508 2948

NOTES:

  1. Valves are supplied with a handwheel actuator through 14" x 12" x 14". Bevel gear supplied on 16" x 14" x 16" and larger.

General Notes:

  1. Dimensions, weights, and other engineering data are subject to change or modification. This data is not to be used for construction unless confirmed by CNI.
  2. All pressure seal gate valves are available with a solid wedge. Specify figure number 55015.
  3. Meets design requirements of ASME Section III, B16.34, B16.5, B16.25 and B16.10

* Specify pipe schedule.
** Mfg std end-to-end dimensions.
*** Weight includes standard bevel gear where applicable (see note 1 above).



ASME Class 2500

Pressure Seal Gate Valves - Dimensions
  • Fig. No. 55525H-7-WE* Flex Wedge, Butt Weld Ends
  • Fig. No. 55525H-7 Flex Wedge, Flanged Raised Face
  • Fig. No. 55525H-7-RJ Flex Wedge, Flanged, Ring Joint
  • Fig. No. 55425H-7-WE* Parallel Seat Disc, Butt Weld Ends
  • Fig. No. 55425H-7 Parallel Seat Disc, Flanged, Raised Face
  • Fig. No. 55425H-7-RJ Parallel Seat Disc, Flanged, Ring Joint
Dim Description VALVE SIZES (inches)
2 2.5 3 4 6 8 10 12 14 16 18 20 24
A End-to-End Weld Ends in. 14.5** 13 14.5 18 24 30 36 41 44 49 55 62 66
mm 368 330 368 457 609 762 914 1041 1117 1244 1397 1574 1676
A1 Face-to-Face Flanged Ends in. 22.75** 22.75** 22.75 26.5 36 40.25 50 56 (2) (2) (2) (2) (2)
mm 577 577 577 673 914 1028 1270 1422 (2) (2) (2) (2) (2)
A2 Face-to-Face RTJ in. 23** 23** 23 26.88 36.5 40.88 50.88 56.88 (2) (2) (2) (2) (2)
mm 584 584 584 683 957 1039 1293 1445 (2) (2) (2) (2) (2)
K Center-to-Top Open in. 22.00 22.00 22.00 25.88 32.50 37.50 40.75 56.00 72 81 89 97 115
mm 559 559 559 658 826 953 1036 1423 1829 2057 2260 2464 2921
M Handwheel Dia. in. 14 14 14 18 24 24 24 30 30 30 30 30 30
mm 356 356 356 457 610 610 610 762 762 762 762 762 762
*** Weight Weld Ends lbs 268 268 268 304 805 1205 2113 3053 4107 5482 7653 10162 15900
kg 121 121 121 137 363 543 951 1374 1862 2486 3470 4608 7210
*** Weight Flanged Ends lbs 428 428 428 532 1425 2090 4038 5890 (2) (2) (2) (2) (2)
kg 193 193 193 240 642 941 1818 2651 (2) (2) (2) (2) (2)

NOTE:

  1. Valves are supplied with a handwheel actuator on sizes 2½" - 10". Bevel gear supplied on 12" - 24".
  2. For flanged end data on 14" - 24"— contact CNI.


VENTURI GATE VALVES


Fig. No. 55525H-7-WE* Butt Weld Ends

Dim Description VALVE SIZES (inches)
8x6x8 10x8x10 12x10x12 14x12x14 16x14x16 18x16x18 20x18x20
A End-to-End in. 24 30 36 41 44 49 55
mm 610 762 914 1041 1118 1245 1397
K Center-to-Top Open in. 32.50 37.50 40.75 56.00 72 81 89
mm 826 953 1036

Copyright © 2020 Crane Co. All Rights Reserved.