Pressure Seal Lift Check Valves

 

Dimensions & Weights


Pressure Seal Lift Valves - Dimensions and Sizes

 ASME Class 900

Lift Check Valves
  • Fig. No. 58609-7-WE* Butt Weld Ends
  • Fig. No. 58609-7 Flanged, Raised Face
  • Fig. No. 58609-7-RJ Flanged, Ring Joint
Dim Description VALVE SIZES (inches)
2 2.5 3 4 6 8 10 12 14
A End-to-End Weld Ends in. 124 124 12 14 20 26 31 36 39
mm 304 304 304 355 508 660 787 914 990
A1 Face-to-Face Flanged Ends in. N/A N/A 15 18 24 29 33 38 40.5
mm N/A N/A 381 457 609 736 838 965 1028
A2 Face-to-Face RTJ in. N/A N/A 15.13 18.13 24.13 29.13 33.13 38.13 40.88
mm N/A N/A 384 460 612 739 841 968 1039
K Center-to-Top Open in. 6 6 6 7 12 15 17 21 24
mm 152 152 152 184 292 381 425 533 603
  Weight Weld Ends lbs 49 49 49 103 299 588 978 1517 2036
kg 22 22 22 46 135 266 443 688 923
  Weight Flanged Ends lbs N/A N/A 109 180 324 948 1425 2165 3082
kg N/A N/A 49 82 147 430 646 982 1398

NOTE:

  1. Integral body seat on 2” through 4” .


VENTURI LIFT CHECK VALVES

Lift Check Valves

Fig. No. 58609-7-WE* Butt Weld Ends

Dim Description VALVE SIZES (inches)
8x6x8 10x8x10 12x10x12 14x12x14 16x14x16
A End-to-End in. 24 29 33 38 40.5
mm 609 736 838 965 1028
K Center-to-Top Open in. 12 15 17 21 24
mm 292 381 425 533 603
  Weigh lbs 303 602 1003 1549 2076
kg 137 373 455 702 941
General Notes:
  1. Dimensions, weights, and other engineering data are subject to change or modification.
    This data is not to be used for construction unless confirmed by CNI.
  2. For best performance, size for full open operation. See Cv in the Flow Data Section.
  3. Meets design requirements of ASME Section III, B16.34, B16.5, B16.25 and B16.10.
  4. Mfg std end-to-end dimensions

* Specify pipe schedule.



ASME Class 1500

Lift Check Valves
  • Fig. No. 58615-7-WE* Butt Weld Ends
  • Fig. No. 58615-7 Flanged, Raised Face
  • Fig. No. 58615-7-RJ Flanged, Ring Joint
Dim Description VALVE SIZES (inches)
2 2.5 3 4 6 8 10 12
A End-to-End Weld Ends in. 14.5 16.5 18.5 21.5 27.75 32.75 39 44.5
mm 368 419 469 546 705 831 990 1130
A1 Face-to-Face Flanged Ends in. 16.55 16.5 18.5 21.5 27.75 32.75 39 44.5
mm 419 419 470 546 705 832 991 1130
A2 Face-to-Face RTJ in. 16.63 16.63 18.63 21.63 28 33.13 39.38 45.13
mm 422 422 473 549 711 841 100 1146
K Center-to-Top Open in. 6 6 7 8 12 16 19 21
mm 152 152 177 203 311 400 488 533
  Weight Weld Ends lbs 53 53 87 141 424 824 1414 2246
kg 24 24 39 63 192 373 641 1018
  Weight Flanged Ends lbs 113 113 167 268 724 1323 2229 3470
kg 51 51 75 121 328 600 1011 1574

NOTE:

  1. Integral body seat on 2" through 4" .


VENTURI LIFT CHECK VALVES

Lift Check Valves

Fig. No. 58615-7-WE* Butt Weld Ends

Dim Description VALVE SIZES (inches)
8x6x8 10x8x10 12x10x12 14x12x14
A End-to-End in. 27.75 32.75 39 44.5
mm 705 831 990 1130
K Center-to-Top Open in. 12 16 19 21
mm 311 400 488 533
  Weight lbs 430 840 1444 2282
kg 195 381 855 1036

General Notes:

  1. Dimensions, weights, and other engineering data are subject to change or modification.
    This data is not to be used for construction unless confirmed by CNI.
  2. For best performance, size for full open operation. See Cv in the Flow Data Section.
  3. Meets design requirements of ASME Section III, B16.34, B16.5, B16.25 and B16.10.

* Specify pipe schedule.




ASME Class 2500

Lift Check Valves
  • Fig. No. 58625H-7-WE* Butt Weld Ends
  • Fig. No. 58625H-7 Flanged, Raised Face
  • Fig. No. 58625H-7-RJ Flanged, Ring Joint
Dim Description VALVE SIZES (inches)
2 2.5 3 4 6 8 10 12
A End-to-End Weld Ends in. 134 13 154 18 24 294 334 384
mm 330 330 381 457 609 736 838 965
A1 Face-to-Face Flanged Ends in. 205 20 22.75 26.5 36 40.25 50 56
mm 508 508 578 673 914 1022 1270 1422
A2 Face-to-Face RTJ in. 20.255 20.25 23 26.88 36.5 40.88 50.88 56.88
mm 514 514 584 683 927 1039 1293 1445
K Center-to-Top Open in. 7 7 8 10 13 17 20 22
mm 171 171 196 241 323 425 508 552
  Weight Weld Ends lbs 78 78 121 151 527 900 1700 2801
kg 35 35 55 68 239 408 771 1270
  Weight Flanged Ends lbs 173 173 298 416 1214 1937 3689 5901
kg 78 78 135 189 550 878 1673 2676

NOTE:

  1. Integral body seat on 2" through 3" .


VENTURI LIFT CHECK VALVES

Lift Check Valves
  • Fig. No. 58615-7-WE* Butt Weld Ends
Dim Description VALVE SIZES (inches)
8x6x8 10x8x10 12x10x12 14x12x14
A End-to-End in. 36 434 494 644
mm 914 1092 1244 1625
K Center-to-Top Open in. 13 17 20 22
mm 323 425 508 552
  Weight lbs 577 1035 1914 3061
kg 261 469 868 1388

General Notes:

  1. Dimensions, weights, and other engineering data are subject to change or modification.
    This data is not to be used for construction unless confirmed by CNI.
  2. For best performance, size for full open operation. See Cv in the Flow Data Section.
  3. Meets design requirements of ASME Section III, B16.34, B16.5, B16.25 and B16.10.
  4. Mfg std end-to-end dimensions.

* Specify pipe schedule.


Copyright © 2021 Crane Co. All Rights Reserved.